Operation Manual

Niagara SCX User Guide
ViewCast 79
Output tab
Set the output destination on the Output tab (Figure 72).
Figure 72. Output tab
The Output tab has the following controls.
Enable
Streaming
Enable this field to stream to a Flash Media Server.
Server
Address
Enter the address for the server.
Stream Name
Enter the name of the stream.
Server Type
Enter the server name or IP address.
Username
Enter the user name.
Password
Enter the password.
Save to File
Click Save to file if you want to save the content to a file.
Note: Remember the encoder system references the file name and not the system
running SCX Explorer.
File Name
Click on the browse button at the end of the field to search for a file name.
IMPORTANT! When Niagara SCX and SCX Explorer reside on different
computers, always start your browse for files by clicking Network. Then
work down or enter the entire file pathname beginning with the system
name (such as \\fileserver\c\videos).