Operation Manual

Niagara SCX User Guide
ViewCast 45
Video Settings tab
Use the Video Settings tab (Figure 43) to control the capture properties for the selected video
device.
Figure 43. Video Settings tab
The Video Settings tab has the following controls.
Input
Select the input connectors available for capture device from the drop-down
list.
Signal
Select the video standards the capture device supports from the drop-down
list.
Proportions
Select the capture properties from the drop-down list.
Brightness
Contrast
Saturation
Hue
Drag the sliders to adjust the capture properties individually. These capture
properties remain available regardless of whether the encoder starts or
remains idle.
Note: When making adjustments, verify adjustments apply to chosen input.
Otherwise, your adjustments apply to all the input sources listed.
Gamma
Correction
Adjust the gamma of the incoming video. See Gamma Correction for more
information.
Tuning
Utilities
Click Tuning Utilities to access tuning utilities for a selected card. Refer to
Tuning Utilities for additional diagnostics information.
Restore
Defaults
Click Restore Defaults to restore the system to the factory defaults.