Operation Manual

Niagara SCX User Guide
ViewCast 101
Filters tab
You can use the Filters tab (Figure 92) to enable SimulStream
®
and deinterlacing. This tab is
optional. See Niagara SCX and SimulStream for information on setting up a SimulStream session
and filters. Also, see Deinterlace for information on telecine, inverse telecine, and motion
adaptive deinterlace.
Figure 92. Filters tab
The Filters tab has the following controls.
Enable
SimulStream
Enable SimulStream.
Show X filters
per device
Specify how many filters you plan to expose.
Allow
multiple
instances of
each filter
Enable this field to allow multiple video capture streams.
Off
Perform no deinterlacing of any kind.
Auto
 Apply inverse telecine deinterlacing to all telecine video.
 Apply motion adaptive deinterlacing to all video that is not telecine.
 Switch dynamically between the two modes as the content changes.
Note: Available for NTSC video only.