Extra Information

Chapter 10: MPEG-4 Options and Settings
72 ViewCast
You must first select from the Insert option, then select Encoder (Figure 122) to create an encoder.
Figure 122. Insert, Encoder Option
The system provides you a set of options (Figure 123) for the type of encoder you want to create.
Select MPEG4 Encoder Driver. Then, click OK.
Figure 123. Encoder Options List
The window in Figure 124 displays after you select the MPEG4 Encoder Driver.
Figure 124. MPEG4 Encoder Driver Selection
Table 20. MPEG-4 Encoder Tabs
Tab Description
Auto/Name
• Allows users to set the name for the encoder and select the option to
Automatically Start Device at Service Startup (Figure 125).
• The encoder starts when Niagara SCX service starts if you select auto start.
• The Located On field provides the machine name where the encoder resides.
• The window now lists MPEG-4 as an available encoder (Figure 126).