Extra Information

Niagara SCX User Guide
ViewCast 31
Figure 53. Rename Encoder Display
9. Type a name for the encoder such as Encoder 1 or Main Auditorium.
10. Repeat the above steps for any additional encoders installed on this sever.
11. Press Enter to save the name change.
Encoder
The Encoder menu contains options to start, stop and reset an encoder. Table 9 explains each
option in detail.
Table 9. Menu Bar Encoder Options
Option Description
Encoder Start Allows you to start an encoder.
Encoder Stop Allows you to stop an encoder.
Encoder Reset Allows you to reset an encoder.
The Encoder menu allows you to start, stop, and reset any encoder displayed in the Niagara SCX
Explorer (Figure 54).
Figure 54. Encoder Menu Options
Start an Encoder
Click to select an encoder in the left side of the Niagara SCX Explorer. Click the Encoder menu
and select Start to start an encoder.
NOTE: The Niagara SCX Explorer starts the encoder.
You can alternately start an encoder by clicking the right-mouse button and selecting Start
Encoder while you have the specific item selected.