Operation Manual

-21-
After you input the preferred default location in the *Default AV Folder box, you can begin
exporting your files from Niagara Pro.
Press the <Menu> button to access the Niagara Pro menu.
Using the UP/DOWN arrow buttons, highlight the Export Files option and press the <Enter>
button.
Then select the To USB Device option and press <ENTER>.
The next screen will ask you to select the drive destination and to provide a list of active USB drives
connected to the Niagara Pro.
Select the USB drive to which you wish to export your file, and then press <ENTER>.
The next screen will ask you to select a source file, i.e., the file you want to export to the USB
device.
Your source file should appear on the following screen. NOTE: The file name on this screen is for
instructional purposes only.
Upon seeing the name of the file you wish to export on the screen shown directly above, press
<ENTER>. You will then see the following screens.
Once the Niagara Pro is finished exporting the file, you can remove the USB device.