Operation Manual

-10-
Changing the Niagara Pro Network Settings
Press the Menu button to access the Niagara Pro EASE menu.
The EASE menu options are as follows:
Use the <UP> and <DOWN> buttons to move the select arrow in the menu until the arrow points to
Setup System option.
Now, press the <ENTER> button.
The Niagara Pro LCD readout will display the Setup menu. Using the <UP>/<DOWN> buttons,
select Network and press the <ENTER> button.
Select the network interface you wish to modify and then press <ENTER>.
Select Change Settings and press the <ENTER> button.
The next menu presents the various network settings. Selecting one of these menu items allows you
to change these individual settings. Once you modify these settings, the changes will be saved until
you modify the settings again or you until restore the Niagara Pro back to its original factory
settings.
Select DHCP On/Off, then press the <ENTER> button. If you wish to cancel this process, press the
<MENU> button to return to the main menu.
The following pictures and their respective actions represent your choices.