Operation Manual

-4-
Connecting to an electrical power source
Niagara Pro ships with three different power cables, as follows:
• North America Adapter Cable (110v)
• International Adapter Cable (220v)
• UK Adapter Cable (220v)
Select the appropriate cable for your region and attach the block end to the power input located on
the upper corner on the rear panel of Niagara Pro.
Plug the other end into a wall outlet or surge protection enabled power strip connected to a wall
outlet or other common power source.
Warning
The plug-socket combination must be accessible at all times, because it serves
as the main disconnecting device.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.