Operation Manual

-124-
You can then test your settings by clicking the Send Test Email link. The page will report if the
email was successfully sent or if it failed to send.
Idle Screen Information
This section allows you to modify the information displayed on the front panel display of the
Niagara Pro LCD.
Check the boxes next to the various information you want displayed. This information is cycled as
the LCD display alternates between status information and encoder information.
At the top of the LCD idle screen is the default message Niagara Pro is Ready. You can customize
this message.
Once you have entered the information above, click the Submit button to save your changes.
Default Directory Setting
NOTE: ViewCast strongly recommends you do not alter this default setting unless you understand
the risk of saving your files to a directory not located on drive (D:). If you save your files to another
drive on Niagara Pro, these files could be deleted if you use the Restore to Niagara Pro Factory
Defaults feature.
NOTE: Only drive (D:) on the Niagara Pro has available storage to save your files. This drive has
approximately 85 Gigabytes of storage capacity.
NOTE: Drives (C:), (E:), and (F:) are used strictly for Niagara Pro operational programs. Any
modifications to these drives can permanently damage your system and void your warranty.