Operation Manual

GoStream Series User Guide
ViewCast 33
Checking CPU usage
When the system is idle (no encoders are streaming), the CPU percentage is normally 4 % or less. If one or
more encoders are streaming, the percentage is much higher and fluctuates in a range of +/- 10 %. If the
system is using less than 80 %, you may start another encoder depending on the complexity of the profile
without adversely affecting system performance.
To check CPU usage:
1.
Press Menu. The system menu appears.
2.
Press the Up or Down arrow on the slider to select Access Health.
3.
Press Enter. The Access menu appears (Figure 34).
Figure 34. Access menu
4.
Press the Up or Down arrow on the slider to select CPU.
5.
Press Enter. A screen appears (Figure 35) with the amount of CPU cycles currently in use.
Figure 35. CPU cycles screen
6.
Press Enter. The Access menu appears.