Operation Manual

80
The SNMP parameters are as follows:
 Read Community: this is the SNMP Read-Only community string.
 Write Community: this is the SNMP Read-Write community string.
 System Contact: this configures the value for the MIB-II System variable System
Contact. Whatever value entered here is returned for SNMP queries to that variable.
 System Location: this configures the value for the MIB-II System variable System
Location. Whatever value entered here is returned for SNMP queries to that variable.
 Trap Destinations: the GOSTREAM BRD stand-alone supports up to 5 trap destinations.
Enter the desired IP addresses here. Note that the GOSTREAM BRD stand-alone will
only generate SNMP V2C traps.
SNMP Statistics Tab
The SNMP statistics tab displays the current SNMP configuration.