Operation Manual

 IP Output: This field indicates whether the unit is licensed for ASI to IP Output. If it

has the SMPTE 2022 FEC license, it will also be able to generate FEC on the output

streams.

 Monitoring: This field indicates whether or not the unit is licensed for stream monitoring.

If you want to request a license key from Niagara Video, you will need to provide the card serial

number. It can be found in the Product Tab and in the Admin License Key Tab as well. Once

you receive the key from Niagara Video, enter it in the License Key field shown above, and

click on the Apply License Key button. If the key is accepted, you will see the message License

Key Installed OK, as illustrated above. If there are any problems, you will see an error message

in the same location. The following are the possible error messages:

 Invalid key: missing characters: the key you entered is too short. Double-check that you

entered all the characters.

 Invalid/Corrupted Key: the key you entered has the correct number of characters, but it is

invalid. Double check what you entered.

 Serial number mismatch: this key is for serial xxxxxxxxxxxx: BRD license keys are

specific to a unit. You entered a valid license key, but it is intended for a different unit,

whose serial number is displayed in the message. You must use this key on the correct

unit.

 This key has already been applied: License keys can only be applied once. This is a

valid key for this unit, but you have already applied it, and its features are already

available.

Admin Event Log Tab

The BRD includes an Event Log in non-volatile storage. This event log can be used for fault-

finding, and to check for error conditions. The following information is included in each BRD

event in the log: