Operation Manual

User-Saved Configurations

The fields in the user-saved configuration are:

 Status: This indicates whether there is a saved configuration on that particular slot. It

will contain the words Saved or Empty.

 Name: This is an optional name for the configuration. It is not required but highly

advisable. The name can be edited at any time (even when there is no saved

configuration).

 Config Load Button: If you click on this button, the corresponding configuration is

loaded in the BRD card. It will replace the currently-running configuration.

Dashboard™ will take a few seconds to reload (longer if you are accessing over a wide-

area network), but the actual configuration in the BRD is virtually instantaneous. The

Status Message Area will indicate the result of the operation.

 Config Delete Button: If you click on this button, the corresponding configuration and

its description are deleted.

 Config Save Button: If you click on this button, the current card configuration is saved

on the corresponding slot, possibly replacing the configuration saved there if it is not

empty.

 Download Config: If you click on the Save button, the corresponding file is downloaded

to your computer. This feature is provided to allow configuration backups.

If you save a configuration to your computer, and later wish to restore it to the BRD, use the

following procedure:

1. If you have a stand-alone GOSTREAM BRD proceed directly to step 5. If you have an

openGear GOSTREAM BRD, proceed to step 2.

2. On Dashboard, open the user interface for the frame controller (slot 0).