Operation Manual
66
managed – the unit will never replace a DSP image required by any of the loaded firmware
images.
BRD firmware and DSP images are updated in the same fashion as with any standard
openGearâ„¢ card. Once you obtained the upgrade image from Niagara Video, place it anywhere
in your computer and click on the Upload button, as shown below. A dialog box allows you to
select the upgrade file. Note that you can simultaneously upgrade all of your BRD cards and
stand-alone units over multiple chassis if you wish. For more detail, consult the Dashboard
User Manual, chapter 6, section Upgrading Device Software. The Dashboard manual can be
downloaded from:
http://www.opengear.tv/dashboard-software
Note that uploading firmware to the BRD does not affect its operation in any way and does not
introduce any glitches in the inputs/outputs.
The fields in the Firmware Image Management tab are: