Operation Manual

50
 Received Rate (b/s): indicates the measured rate in bits/second at the input of the
decoder. This does not include FEC bit rate or UDP/IP overhead – it is the transport
stream rate.
 Protocol: indicates the detected protocol, either UDP or RTP.
 Stream Source IP Address: indicates the current IP address from which the stream is
being received.
 SMPTE 2022 FEC: Indicates the detected FEC mode, as follows:
o None: SMPTE 2022 FEC transmission is not being detected by the BRD.
o Column Only: The BRD is detecting SMPTE 2022 FEC in Column Only mode.
o Row and Column: The BRD is detecting SMPTE 2022 FEC in Row and Column
mode.
o Not Licensed: The SMPTE 2022 functionality is not licensed in this unit (see the
Admin License Keys Tab). If SMPTE 2022 FEC is present, it is being ignored by
the BRD.
 Columns: If SMPTE 2022 FEC is being received, this indicates the number of columns
detected.
 Rows: If SMPTE 2022 FEC is being received, this indicates the number of rows detected.
 Received Packets: This indicates the number of packets received since the last time the
statistics were reset. This count does not include the FEC packets, if any.
 Lost Packets: This indicates the total number of lost packets since the last time the
statistics were reset. Note that the BRD can only detect lost packets if the incoming
protocol is RTP. It is not possible to detect lost packets with UDP as it lacks a sequence
number.
 Recovered Packets: This indicates the total number of packets recovered with SMPTE
2022 FEC since the last time the statistics were reset.
 Unrecovered Packets: This indicates the total number of lost packets that could not be
recovered with SMPTE 2022 FEC (either because of excessive loss or because SMPTE
2022 is not present).