Operation Manual

genlock compatibility matrix below to confirm the supported combinations. The

SDI output is NOT genlocked to this signal and is free-running.

o Unlocked: The BRD is not detecting any genlock signal. The SDI output is

free-running.

 Genlock Signal: this field indicates the resolution and frame rate of the detected genlock

signal.

Not all combinations of SDI output standard and genlock signal are supported. The matrix

below indicates what combinations are legal.

Genlock Compatibility Matrix

Network Tab

The Network Tab contains protocol-specific statistics and changes according to the decoder

source selection.

Network Tab for ASI Input

The only parameter displayed is the measured input bit rate from the ASI port. This is the same

value also displayed in the ASI Input: Statistics Tab.

Network Tab for UDP/RTP Stream

The following statistics are displayed for UDP/RTP:

SDI Output Signal

576i50

720p50

1080i50

480i59

720p59

1080i59

720p60

1080i60

Genlock Signal