Operation Manual

 The Network tab displays network statistics. It changes according to the decoder source

selection.

 The Configuration tab is a mirror of the Configuration Tab and displays the current

decoder configuration.

Status Tab

The Status Tab provides basic information about the state of the decoding (whether it is decoding

or not) and information about the stream being decoded, if available. If the Enable Genlock

control in the Digital Output: SDI section of the decoder configuration is checked, additional

fields related to the genlock function are displayed.

The Status Tab includes the following information:

 Decoder State: if this indicator is green, the content is being decoded normally.

Otherwise, it will be red and the state of the decoder will be displayed.

 Program Information: this section contains general program information: program

number, name (if available), and the PMT and PCR PIDs.

 Video Information: this section contains information about the video stream: PID,

CODEC (H.264 or MPEG-2), resolution, and whether it is progressive or interlaced.

 Audio Information: if audio decoding is enabled, this section contains information about

the stream being decoded. There are two audio information sections, one for each audio

decoder. If the audio decoder is enabled, it contains the PID, CODEC, and language

code (if present in the stream).