Operation Manual

39
Digital Output: SDI
This selection enables the SDI output. The composite and HDMI outputs will be disabled. Note
that, in this mode, the decoder may output a garbled signal on the HDMI output. Do not
use the HDMI output when SDI is selected, even if there is a signal present.
The available parameters are:
Resolution: Select the SDI output resolution. The decoder can convert between formats
and frame rates, so this selection can be made independent of the decoded signal. The
available formats are:
SMPTE-334 Closed-Caption Type: The decoder supports Closed-Caption injection if
the incoming bitstream has captions. The options are:
o Off: no Closed-Captioning injection.
o EIA-608: Inject Closed-Captioning in EIA-608 format.
o EIA-708: Inject Closed-Captioning in EIA-708 format.