Operation Manual

34
 A stream name
The first part of the URL defines the protocol, as follows:
 rtmp: standard RTMP with no security
 rtmpt: RTMP tunneled over HTTP
 rtmpe: encrypted RTMP using proprietary security
 rtmps: encrypted RTMP over SSL
 rtmpte: encrypted RTMP using proprietary security, tunneled over HTTP
 rtmpts: encrypted RTMP over SSL, tunneled over HTTP
The servername field is the host name or IP address of the RTMP server to be contacted. The
app field is the application in the server that should receive the data being transmitted. Note
that, depending on the service, the app field may contain a complete path or even a set of
parameters.
The RTMP Client configurable parameters are:
 RTMP Protocol: Select the protocol variant, as discussed above.
 RTMP Server: Enter the host name or IP address of the RTMP server to be contacted. If
you want to use host names instead of IP addresses, make sure to configure at least one
DNS server. DNS servers can be specified in the Network Configuration Tab, or, for the
GOSTREAM BRDc stand-alone unit, also in the Control Port Configuration Tab or
obtained by DHCP.
 RTMP Port Selection: If your RTMP server is using the default TCP ports for the
protocol variant, select Use Default. If your server is using a non-standard port, select
Specific Port. When Specific Port is selected, an additional field is displayed: