Operation Manual

32
 On Input Loss: selects the decoder behavior when the input signal disappears. If Freeze
Frame is selected, the decoder displays the last valid frame; if Go to Black is selected,
the decoder resets the signal and goes to black. The criterion for signal disappearance is
loss of tables.
 Primary Reception: select between Unicast and Multicast. In Unicast mode, the
stream must be sent to the decoder’s streaming port IP address (see the Network Tab). In
Multicast mode, the decoder will join an IP Multicast stream. When this mode is
selected, a new field appears for the multicast address:
o Primary Multicast Address: enter the desired IP multicast address. The decoder
will only accept addresses between 224.0.0.0 and 239.255.255.255 in this field.
 Primary UDP Port: enter a valid UDP port. Valid values are between 1 and 65535.
 Redundant Reception: if this box is checked, a backup UDP flow can be configured. If
the BRD stops receiving packets in the primary flow, it will switch to the backup. When
this box is checked, the following new fields appear:
o Flip Time (s): this configures how long the BRD will wait to decide to flip between
primary and backup streams.
o Backup Reception: select between Unicast and Multicast. In Unicast mode, the
stream must be sent to the decoder’s streaming port IP address (see the Network Tab).
In Multicast mode, the decoder will join an IP Multicast stream. When this mode is
selected, a new field appears for the multicast address:
o Backup Multicast Address: enter the desired IP multicast address for the backup
stream. The decoder will only accept addresses between 224.0.0.0 and
239.255.255.255 in this field.
o Backup UDP Port: enter a valid UDP port for the backup stream. Valid values are
between 1 and 65535.