Operation Manual

27
Click here
to configure
The following parameters are available:
 Port Name: All BRD inputs and outputs can be assigned a user-defined port name. This
name is used to identify the port later when making connections. Use any descriptive
name suitable for your application, or accept the default.
 Enabled: the ASI Input can be enabled/disabled using this parameter. When the port is
disabled, the corresponding LED in the front and back panels stays off.
Once the desired configuration is entered, click on the Apply button to have them take effect.
This will cause the changes made in the Configuration Parameters to be implemented. Clicking
on the Cancel button will discard any changes.
ASI Input: Statistics Tab
The Statistics Tab for the ASI Ports provides a quick visual summary status for the ports. A
sample is depicted below:
The ASI Input Port indicator can have the following values:
 RX Locked: The port is locked to an input signal.
 RX Disabled: The port is disabled.
 RX Unlocked: The port is not locked to any signal.