Operation Manual

26
ASI Input Port Tab
The BRD decoder has one fixed-function ASI Input Port. This tab is used to configure and
manage it.
ASI Input: Configuration Tab
The Configuration Tab for the ASI inputs is shown below:
The Configuration tab is divided into two areas:
 The ASI Input table, which displays an overview of the ports. It contains the following
fields:
o Status: Indicates the current status of the port. The possible values are:
 Locked: the port is enabled and locked to a valid ASI signal.
 Unlocked: the port is enabled, but has no signal.
 Disabled: the port is disabled by user configuration.
o Size: Indicates the detected ASI transport packet size (188 or 204 bytes). If the
port is disabled or unlocked, this field will show a value of 0 (zero).
o TS Bit Rate (b/s): Measured transport stream bit rate, in bits/second.
o Port Name: All BRD ports can be assigned a user-defined name, which is
displayed here. The default name is ASI Input 1.
o Edit: This button, when clicked, brings up the configuration area of the port.
 The configuration area of the port, which is accessed by clicking on the Edit button, as
shown below.