Operation Manual
25
The following parameters are reported in the Network Statistics tab:
Alarm on Link Loss: Reports the current setting of this parameter.
IP Address: Reports the current IP Address for the port.
Subnet Mask: Reports the current Subnet Mask for the port.
Default Gateway: Reports the current Default Gateway for the port.
DNS Server 1, DNS Server 2: Report the current DNS IP addresses.
IGMP Version: Reports the current setting for this parameter.
Interface Speed: Reports the current setting for this parameter.
Port 1 Link: This indicator has the following states:
o Link OK: The port has established link with the switch.
o No Link: The port does not currently have link. If Alarm on Link Loss is set to
Yes, the Dashboard™ Card State will be red and the Status LED in the front of the
board will also be red. If Alarm on Link Loss is set to No, this indicator will still be
red, but the alarm will not propagate.
Link Speed (Mb/s): This parameter reports the actual speed negotiated with the switch
for the port. If the port has no link, the value reported here is zero.
MAC Address: This reports the MAC address of the Ethernet port.