Operation Manual

99
Admin Config Files Tab
As you make configuration changes to the B264, they are automatically persisted in non-volatile
storage. If the card is rebooted or power-cycled, it will come back in the same configuration.
In addition to automatic configuration persistency, the B264 also offers the ability to save up to 5
complete configurations, load them, and even export them. This can be used to quickly
configure it for different scenarios, or for saving configuration “checkpoints” as a complex
configuration is built. Since configurations can be exported, they can be archived outside the
card as well. Additionally, in the ITV-B264d, saved configurations can be selected in the front
panel.
Finally, the B264 also offers 5 pre-saved configuration templates for some common scenarios.
The layout of the Admin Config Files tab is shown below.
User-Saved Configurations
The fields in the user-saved configuration are:
 Status: This indicates whether there is a saved configuration on that particular slot. It
will contain the words Saved or Empty.
 Name: This is an optional name for the configuration. It is not required but highly
advisable. The name can be edited at any time (even when there is no saved
configuration).