Operation Manual

43
Controls Slaved
to Encoder 1
Controls Shared
with Encoder 1
Encoder 2 Audio
Insertion Controls
The operation is as follows:
 The Encoder State, Input Selection, Video Input Settings, Output Resolution and
Coding Delay (in the Advanced Tab) controls are slaved to the corresponding controls
in Encoder 1. They will reflect the state of their Encoder 1 counterparts.
 If Video Input Settings in Encoder 1 is set to Manual Selection, the Input Resolution,
Input Source and Field/Frame Rate controls are shared with Encoder 1, and apply to
whatever input port is selected. Changes here will be mirrored in the corresponding
parameters for Encoder 1. If Video Input Settings in Encoder 1 is set to Auto Detected,
these controls are not displayed.
 Encoder 2 can optionally share one or both audio channels from Encoder 1. This is
accomplished by checking Include Audio Ch1/2 boxes in the Audio Insertion Controls
displayed above.
Encoder Advanced Configuration Tab
The appearance of the Encoder Advanced Configuration Tab is a function of the choices made in
the Multiple Audio Support section of the Encoder Basic Configuration Tab. The Advanced
Configuration Tab is divided into four major areas:
 Video Parameters: these are advanced controls related to the encoding of the video.
 VBI/Ancillary Data Insertion: controls related to Closed-Captioning and Active Format
Description (AFD) insertion.
 Audio Parameters: these are advanced controls related to the audio subsystem.