Operation Manual
101
copy configuration between openGear B264 and modular B264 encoders). This process
is illustrated below:
This process is discussed in further detail in the Dashboard User Manual, chapter 5, section
Restoring Configurations to Devices.
Pre-defined Templates
The B264 offers 5 pre-defined configuration templates, as indicated below.
To load a template, just click on the Load button next to it. The pre-defined templates are;
Composite to Ethernet 1, 2 and ASI: This template configures both encoders to run
from composite inputs (Encoder 1 from Video 1, Encoder 2 from Video 2). Encoders are
routed to individual multicasts on both Ethernet ports, and as an MPTS to both ASI Ports.
SD-SDI to Ethernet 1, 2 and ASI: This template configures both encoders to run from
SD-SDI inputs (Encoder 1 from Video 1, Encoder 2 from Video 2). Encoders are routed
to individual multicasts on both Ethernet ports, and as an MPTS to both ASI Ports.