Operation Manual

Niagara 9100 Series User Guide
ViewCast 17
Niagara 9100 series home page
The home page (Figure 6) is the first page presented after you log into the Niagara SCX remote
management software. From this page, you can access the different windows for configuring,
controlling, and monitoring the activities and alerts of the Niagara system.
Figure 6. Series home page
Menu bar commands
The home page menu bar allows you to use the commands described in the table below.
Menu
Command
Function
Home
 View general administrative information about
the Niagara system.
 Use the menu bar commands.
Encoders
 All Encoders – View the encoder profiles.
 Groups – Manage specific encoder groups that
have one or more encoders assigned.
Configuration
 Machine Properties – View details on the
machine properties including the network
name, serial number, and all software versions
installed.
 Alerts – Modify the settings to control how the
system manages application alerts that occur
during normal operations or streaming.
 Network Properties – View information on the
network properties and addresses for both NIC
ports and modify these properties.
 IP Route Table – Add or delete IP destinations.
 System Configuration – Modify the system
configuration including setup for email alerts
from the Niagara system whenever it