Operation Manual

Niagara 9100 Series User Guide
ViewCast 191
5.
Click Next.
Figure 204. Installation Complete
6.
Click Close.
After the installation is complete, the ViewCast SNMP agent will be installed as an Automatic (delayed
start) service. After the next reboot, it starts automatically. Typically, you don’t need to reboot the
machine after installation.
Before you start the ViewCast SNMP agent service, you need to install and configure the other two
services: Native Windows SNMP service and SuperMicro Health Assistant service (see Install and
Configure Supero Doctor III Agent Service).
To start ViewCast SNMP agent service manually:
1.
Run Windows service management tool services.msc
2.
Right click on ViewCast SNMP Agent then click Start.
Figure 205. ViewCast SNMP Agent
Note: When you start ViewCast SNMP agent service, the Windows SNMP service
will start or restart automatically if Windows SNMP service is installed.