Operation Manual

Niagara 9100 Series User Guide
ViewCast 159
Audio tab
Use the following table to configure the audio IP input settings.
Figure 169. Video tab
To configure audio settings:
1.
The PID drop-down list is updated from the detect function on the Video tab. Make sure the
Video Prog# and the Audio Prog# match. Select the PID.
Note: The PIDs will not match. It is possible to have several Audio PIDs for a given
Prog#.
2.
Select the Overlay Closed Caption check box to enable overlay closed captions.
3.
Drag the slider to adjust the Left Volume and Right Volume.
4.
(Optional) Select Mute Audio to silence the audio.
5.
Click Save Settings.