Operation Manual

Niagara 9100 Series User Guide
ViewCast 155
IP Inputs
The current version of Niagara SCX adds the ability to accept Multi-Program Transport Stream (MPTS)
and Single Program Transport Stream (SPTS) for all Niagara models via the Ethernet ports.
IP ingest
To enable IP ingest as the video source, you must either create a new encoder or edit an existing
encoder.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. Configure the IP inputs on the video and audio tabs for
each encoder type. This section explains the steps for configuring the IP inputs. Configure the rest of the
settings as you normally would.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.