Operation Manual

Digital Inputs

112 ViewCast

Output tab

Use the following table to configure the output digital input settings for an Adaptive Adobe Flash

encoder.

Note: The choices in the drop-down list may vary.

Figure 114. Output tab

To configure output settings:

Select Stream to Flash Media Server.

Enter the destination FMS Address.

Note: The Stream Path that displays is a combination of the FMS (Flash Media Server)

address and the stream name.

Enter the Stream Name.

Note: The system accepts the %v parameter for video bitrate, %i for indexing, and %b for

overall bitrate, which is compatible with Adobe Flash media encoder.

Select Stream to File System to enable archiving content to the file system.

Accept the default location that displays in the Folder field or choose your own location for

the file. To choose your own personal location select the link (horizontal ellipses or … ) to the

right of the Folder field and display the options (Figure 115).

Note: By default, the system sets this folder to D:\AVFiles. See Connecting an external

storage device for instructions on saving video files to a USB storage device.

Figure 115. Select a folder