Operation Manual

Niagara 9100 Series User Guide
ViewCast 107
Video tab
Use the following table to configure the video digital input settings for an Adaptive Adobe Flash
encoder.
Note: The choices in the drop-down list may vary.
Figure 107. Video tab
To configure video settings:
1.
Select the video input Source from the drop-down list.
2.
In the Input field, the video input is SerialDigital.
3.
In the Input Size field, select the pixel size of the encoded video from the pre-determined
sizes in the drop-down list.
You can also specify a custom size for your video. This customization is useful when you are
capturing video to be played on a mobile video-device that requires a non-standard size for
compatibility.
When you click Custom, two additional fields appear so you can enter the exact size you
want the resulting video to be (Figure 108).
Figure 108. Custom fields
4.
Select the Frame Rate from the drop-down list.
5.
Drag the sliders to adjust the Brightness, Contrast, Hue, and Saturation (Figure 109).
Figure 109. Video Filter Settings