Quick Start Guide

11) Select Windows Media Encoder Driver from the drop-
down menu in the Encoder Type eld.
12) Enter a name for the encoder and then click Create New
Encoder.
13) Click the Video tab and select the appropriate input
seng.
14) Click the Audio tab and select the appropriate audio
source.
15) Click the Output tab and click the Enable Pull check box. In
the Pull from Port eld, enter port 7007.
16) If not desired, clear the Save to File check box. Click
Submit.
17) When the Operaon Successful window appears, click
OK. Test this streaming prole from the Encoders window
by clicking the red circle in the Streaming column for this
encoder prole.
18) Open Windows Media Player from your desktop. Posion
the cursor to the le of this opon, right click, and select
File > Open URL.
19) Enter the serial number and the port number (in the
format hp://fennnnnnnn:pppp) in the Open URL
window. Press Enter. Your streaming video from the
system displays in the Windows Media Player window.
20) Please register the appliance as soon as possible by
accessing the maintenance menu.
4. First Start Setup continued
I: Lock
• This locks the cover on the Niagara 9100. (Key is included.)
J: Release buon
• Press this buon in and gently pull the panel toward you to release the
front cover from the Niagara 9100.
K: Hard drive bay
• Stores the hard drives.
• Pull the level toward you to release the bay.
L: USB ports
• Allows the export of les to USB storage devices, installing updates or
rmware, or connecng USB devices.
M: UID buon
• Press this buon to illuminate the LED on both the front and rear of the
machine. The LED remains lit unl you push the buon on the second
me.
N: UID LED light
• Fast blinking red - fan failure
• Slow blinking red - power failure
• Solid red - CPU overheat
• Solid blue - Local UID buon depressed
• Blinking blue - IPMI acvated UID
O: Reset buon
• Press this buon to reboot the system.
P: Power buon
• Press this buon once to turn power on or o to the server system.
• Turning o system power removes the main power but keeps standby
power supplied to the system.
A: LCD display
• The LCD display shows the system and allows you to perform basic
funcons.
B: Cancel buon
• Press this buon to cancel a system menu acon.
C: Enter buon
• Press this buon to accept a system menu acon.
D: Direcon buons
• Use these buons to maneuver through the system menu
( see the user guide for more informaon).
E: LED light
• The LED light illuminates when you press the UID (unit idener)
buon on the rear of the chassis. This funcon is for easy system
locaon in large stack conguraons.
F: LAN indicator lights
• These indicators ash when there is network acvity.
G: SATA indicator light
• This indicator light ashes when there is SATA and/or USB port
acvity.
H: Power indicator light
• This light indicates power is being supplied to the system’s power
supply units. This LED should normally be illuminated when the
system is operang.
Use the guide above (Figure 2) to familiarize yourself with the front
panel controls of the Niagara 9100.
Quick Start Guide
Niagara
®
9100
Contact ViewCast Technical Support at [e-mail].
40-03319-02-A
© 2012 ViewCast Corporation. ViewCast
®
, Niagara
®
(and design)
TM
are registered trademarks of ViewCast Corporation
or its subsidiaries. All other trademarks are the property of their respective owners. Product specications and availability
may change without notice.
US / Canada
l
800.540.4119
|
Europe/Middle East/Africa
l
[phone]
|
Asia / Pacic
l
[phone]
Figure 2. Niagara 9100 Front Panel