Operation Manual

Niagara 9100 Series User Guide
ViewCast 159
TS Container
When you configure an MPEG4 encoder you can select MPEG2 Transport Stream as the container type
for the Video Encoder. To enable TS container streaming, you need to create either a new MPEG4
encoder or edit an existing MPEG4 encoder.
Note: The Type on the Encoders page (Encoders  All Encoders) displays as 264.
Streaming to a TS container
Figure 168. MPEG4 encoder
To configure TS container settings:
1.
In the Video Encoder field on the Video tab, select either MPEG2 or H264.
Note: H.264 and MPEG2 are the only currently accepted video encoder types that will
output with the TS container.