Operation Manual

Digital Inputs
150 ViewCast
Figure 159. Output tab
To configure output settings:
1.
Click on a Windows Media Capture Profile from the drop-down list.
2.
Select Enable Pull.
3.
Enter a port number that the server will use to pull the stream.
4.
Select Enable Push.
IMPORTANT! Be sure to enter a port number not already assigned to another encoder. If
two encoders attempt to use the same port number, one or both encoders will fail to start.
5.
Enter a port number that the server will use to push the stream.
6.
Enter the Server name or IP address.
7.
Enter the Publishing Point.
Note: This field is optional.
8.
Enter the User Name.
9.
Enter the Password.
10.
Select Enable Scripting to embed closed captions.
Note: If you enable closed captions through the Osprey driver, you cannot enable scripting.
11.
You can either:
 Click the Save to File check box to save the encoded content to a file. Each time you start
this encoder, the system overwrites the previous file.
 Click the Index the file to drag the slider to any point in your video capture.
 Click Create unique file to create a file that the system does not overwrite.
12.
Accept the default location that displays in the File Name field or choose your own location
for the file. To choose your own personal location select the link (horizontal ellipses or … ) to
the right of the File Name field and display the options (Figure 160).