Operation Manual

Advanced Operations
62 ViewCast
When you click Custom, two additional fields appear so you can enter the exact size you want
the resulting video to be (Figure 55).
Note: The size in the Width and Height fields must be divisible by 2.
Figure 55. Custom fields
5.
Select the Video Encoder from the drop-down list.
6.
Enter the frames per second in the Frame Rate field.
7.
Enter the Bitrate.
8.
Drag the sliders to adjust the Brightness, Contrast, Hue, and Saturation (Figure 56).
Figure 56. Video Filter Settings
Note: Click the Restore button to the right of the filter to reset the settings to the default.
9.
Click the De-Interlace setting you want to apply (Figure 57). Options include:
 None
– Performs no de-interlacing of any kind.
 Auto
– Applies inverse telecine de-interlacing to all telecine video.
– Applies motion adaptive de-interlacing to all video that is not telecine.
– Switches dynamically between the two modes as the content changes.
– Available for NTSC video only.
 InverseTelecine
– Drops the redundant fields and reassembles the video in a 24 fps progressive format.
– Applies inverse telecine de-interlacing to all telecine video.
– Performs no de-interlacing of video that is not telecine.
–Available for NTSC video only.
 Motion Adaptive
– Is an algorithm for de-interlacing pure video (non-telecine) content.
– Applies motion adaptive interlacing to all video. It detects which portions of the image
are still and which portions are in motion then applies different processing to each
scenario.
Figure 57. De-Interlace Settings