Operation Manual

Advanced Operations
50 ViewCast
Output tab
Use the following table to configure the output analog input settings for an Adaptive Adobe Flash
dynamic streaming encoder.
Note: The choices in the drop-down lists may vary.
Figure 41. Output tab
To configure output settings:
1.
Select Stream to Flash Media Server.
CAUTION! Simultaneously publishing to server and file system increases CPU usage.
2.
Enter the destination FMS Address.
Note: The Stream Path that displays is a combination of the FMS (Flash media Server)
address and the stream name.
3.
Enter the Stream Name.
4.
Select Stream to File System to enable archiving content to the file system.
5.
Accept the default location that displays in the Folder field or choose your own location for
the file. To choose your own personal location, select the link (horizontal ellipses or … ) to the
right of the Folder field and display the options (Figure 42).
Note: By default, the system sets this folder to D:\AVFiles. See Connecting an external
storage device for instructions on saving video files to a USB storage device.
Figure 42. Select a folder