Operation Manual

Niagara 9100 Series User Guide
ViewCast 47
Note: Telecine and inverse telecine only apply to NTSC video. They are not used for PAL and
SECAM video. The system disables Auto and Inverse Telecine choices when you select
either PAL or SECAM as the video standard.
9.
Select Add Statistics to overlay video statistics within the video stream for diagnostic
purposes.
10.
Select Embed Timecode to enable embed system time as timecode. This action tags individual
video frames with timecode data. This feature should be used if embedded timecode is
required but your capture device cannot generate it.
11.
Specify the Frame Interval at which timecode should be embedded into the video stream in
the Frame Interval field.
0=disabled
The range is 1 to 30 frames.
12.
Click Save Settings.
Encoder video stream table
The adaptive encoder video stream table (Figure 38) contains five default streams. You can add a new
stream, edit, delete, disable, and set which stream the player will use first. You can sort each column by
clicking on the column heading.
The system validates the stream settings according to the capabilities of your Niagara system.
Figure 38. Encoder video stream table
A.
The table displays five streams at a time. Additional streams display on additional pages. Click
the page number to display the streams on that page. You can also click First to go to the first
page or click Last to go to the last page.
B.
Click this link to add a stream.
Note: If you click Custom as the Input Size, the system will automatically adjust the width
and height of subsequent streams according to the custom settings.