Operation Manual

Advanced Operations
44 ViewCast
Adaptive Adobe Flash Dynamic streaming
encoder with analog inputs
To create an adaptive encoder, Encoders  All Encoders  Create New Encoder link  Encoder Name
field  Publisher drop-down list.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. You must configure the video and audio settings for each
encoder type.
Use the Video, Audio, and Output tabs to edit the settings. Begin with configuring the video and audio
settings, then the server and destination settings. The server and destination settings are different for
each type of encoder.
From the Encoder Properties window (Figure 33), you can set the encoder to start streaming
automatically by selecting the Auto Start check box. You can also start an encoder from this window by
clicking the Start Adobe Flash Dynamic Streaming Encoder link in the top right corner of the window.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.
Figure 33. Adaptive Flash Dynamic streaming encoder