Operation Manual

Niagara 9100 Series User Guide
ViewCast 27
Basic Operations
Basic operations include but are not limited to the following:
 Creating an encoder
 Viewing all encoder
 Starting an encoder
 Editing an encoder
 Stopping an encoder
Logging in
To log in:
1.
Locate the serial number on the side or bottom of the system (in the format fe11430001).
2.
Open the web browser on your computer.
3.
You can either:
 Type the Niagara 9100 serial number in the address bar (Figure 10).
Figure 10. Serial number
Or
 Type the IP address in the address bar (Figure 11).
Figure 11. IP address
4.
Press Enter. The Admin Log In window displays (Figure 12).
Figure 12. Admin Log In window
5.
Type the User Name and Password.
IMPORTANT! The setting to log in for the first time, defaults to the user name admin and
password admin.