Operation Manual

Easy Setup
26 ViewCast
Connecting to an IP network
The Niagara 9100 series systems have two 1 Gbit network interface ports. The network settings for these
ports default to dynamically obtain an IP address from a DHCP server on the network. If a DHCP server is
not available or is not found on the network, the system assigns its own IP address.
Note: If you are not familiar with network protocols, contact your network administrator for
assistance. If you are not able to browse to the unit with a DHCP network, you may connect a
monitor, keyboard, and mouse to the system to determine and set the network connections.