Operation Manual

Advanced Operations
142 ViewCast
Video tab
Use the following table to configure the video digital input settings for a Windows Media encoder.
Note: The choices in the drop-down list may vary.
Figure 147. Video tab
To configure video settings:
1.
Select the video input Source from the drop-down list.
2.
In the Size field, click the pre-determined size of the encoded video from the drop-down list.
You can also specify a custom size for your video. This customization is useful when you are
capturing video to be played on a mobile video-device that requires a non-standard size for
compatibility.
When you click Custom, two additional fields appear so you can enter the exact size you want
the resulting video to be (Note: The size in the Width and Height fields must be divisible
by 2.
Figure 148).
Note: The size in the Width and Height fields must be divisible by 2.
Figure 148. Custom fields
WARNING! Ensure all of the encoders using the same video Proportion and Size settings also
use the same Video and Audio Source settings.