Operation Manual

Niagara 9100 Series User Guide
ViewCast 129
Audio tab
Use the following table to configure the audio digital input settings for an AVI encoder.
Note: The choices in the drop-down list may vary.
Figure 133. Audio tab
To configure audio settings:
1.
In the Source field, select an audio source from the drop-down list.
IMPORTANT! The audio input must match the connectors on the back of the system and your
audio source.
2.
Click the Audio Format from the drop-down list.
3.
Drag the sliders to adjust the Left Volume and Right Volume.
4.
(Optional) Select Mute Audio to silence audio.
5.
Click Save Settings.