Operation Manual

Advanced Operations
102 ViewCast
Adaptive Adobe Flash encoder with digital
inputs
To create an adaptive encoder, Encoders  All Encoders  Create New Encoder link  Encoder Name
field  Publisher drop-down list.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. You must configure the audio and video settings for each
encoder type.
Use the Video, Audio, and Output tabs to edit the settings. Begin with configuring the video and audio
settings, then the streaming properties. The server settings are different for each type of encoder.
From the Adaptive Adobe Flash Encoder Properties window (Figure 99), you can set the encoder to start
streaming automatically by clicking the Auto Start check box. You can also start the encoder from this
window by clicking the Start Adobe Flash Dynamic Streaming Encoder link in the top right corner of the
window.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.
Figure 99. Adaptive Flash encoder