User ’s Model To w e r Manual ST4 Loudspeaker
Thank you for your purchase of the NHT ST4 Super Tower loudspeaker. Like all NHT loudspeakers, the ST4's development has been guided by the study of human hearing, its design rigorously tested, and its components optimized to deliver clean, clear musical sound. Since the quality of your speakers is one of the most important factors in maximizing the sound you'll get from your music and home theater system, we're sure that you'll find your purchase of the ST4 a good investment, and invite your comments.
tallest listener, and toe them in so that imaginary lines coming from the center of each speaker cross in front of the main seating area. You can add time delay to the rear channels with your surround sound processor to make the rear speakers seem farther from the seating area than your room setup will allow. Fig. 1 SpikeKit Installation Each ST4 loudspeaker is shipped with its own SpikeKit, which both improves their stability and firmly couples the speakers to the floor for improved bass performance.
If you have hardwood or other soft floors, which the spikes might scratch or pierce, you may prefer to use the rubber feet included in the SpikeKit. To do so, simply peel the adhesive backings from the rubber feet and place them over the spike holes on the stabilizer bars. Connections Before connecting your ST4 loudspeakers to your system, turn off the power to your amplifier / receiver to avoid damaging the components or the speaker.
set, use a "Y" splitter to send your two amplifiers identical signals. 2) Sending identical amplified signals to your speakers: To ensure that your amplifiers send out tone-and-level matched signals to the ST4's, use either two identical amplifiers, or two amplifier models of similar sound. If two different models, make sure that at least one amplifier has a volume control for level matching.
Limited Warranty Valid Only in the U.S.A.
S p e c i f i c a t i o n s All Super Series products are sonically matched for seamless integration into multichannel systems. Super Series SB1 System Type 2-Way Acoustic Suspension SB2 2-Way Acoustic Suspension SB3 2-Way Acoustic Suspension ST4 3-Way Acoustic Suspension SC1 2-Way Acoustic Suspension SW10 Vented / Powered - 150 watts Class AB Amplifier Driver Complement TweeterWoofer- 1” fluid cooled aluminum dome tweeter with neodymium magnet structure 5.25” Polypropylene 6.
