User`s manual
USER’S MANUAL
7
HOW TO CONFIGURE YOUR COMPUTERLAPTOP
WITH THE NETWORK IP ADDRESS
CONFIGURING VIA WEB BROWSER
1. Log on to the computer.
2. Click the “Start” button (it should be
located at the lower-left corner of your
screen), then click “Control Panel”. Click
“View Network Status and Tasks”, and
then click “Manage Network Connections”.
Right-click “Local Area Network”, then
select “Properties”. When the “Local Area
Connection Properties” window appears,
select “Internet Protocol Version 4 (TCP/
IPv4)” and then click “Properties”.
3. Setting IP address manually: Type IP
address is 192.168.10.x (x is from 2 to 254),
and Subnet mask is 255.255.255.0.
Type the Router’s LAN IP address (the
default IP is 192.168.10.1) into the Default
gateway field.
Wireless Enable Wireless On/Off
SSID The “SSID” of your wireless network
Channel Auto (recommend)
Security type Setup the wireless security and encryption to
Prevent from unauthorized access and monitoring
Supports 64/128-bit WEP, WPA, WPA2,
WPA/WPA2 encryption methods
Security key The “Password” of your wireless network
Wireless Base Configuration - AP Mode
In AP mode and click “Wireless → Basic Settings” located at the web
management interface, the following message will be displayed on your web
browser:
You could configure the minimum number of Wireless settings for
communication, such as Network Name (SSID) and Channel. The Access Point
can be set simply with only the minimum setting items.
Click “Apply” button, the Domo Repeater will restart.