Operation Manual

User Manual
24
If a not-bound SIM card is inserted into the SIM1 or SIM2 slot, the phone shall display the ―Input phone
password‖ popup (the default password is 1122, freely modifiable by user). If the password is correctly
inserted, the phone starts regularly, but a popup will advise the user that the SIM card is changed: ―SIM
card is changed. Do you want to bind it?‖ Choosing ―Yes‖, the current SIM cards will be bound replacing
the old ones; choosing ―No‖, the old binding will remain active.
In case the wrong password is inserted, the phone will normally start and provide the ―new‖ user all the
functionalities except for the ―Phone control‖ menu. In the meantime, an alert SMS ( - ―Attention: this
phone number is using your mobile phone IMEI: XXXXXXXXXXXXXXX‖ - ) will be sent to all the trusted
phone numbers set in the menu from each replaced SIM card. Every time the power on password is
wrongly inserted, the phone will continue to send out alert SMS. If SIM1 has no money or is out of range,
SIM2 will provide to send the alert SMS. If the SMS is not correctly sent out for any reason, the phone will
attempt to send the SMS out periodically, until the SMS is correctly sent out.
Note: if Phone lock is enabled, this function chronologically comes before SIM binding. This means that even if
the SIM binding is activated, it will be unavailable if the wrong password is inserted (because the phone simply
won't boot).
Tip: to avoid this problem, it's advisable to disable Phone lock and enable Privacy firewall instead, since this
function assures the same high level of data security and does not inhibit the use of SIM binding.
 Remote Control:
The user must first insert at least one number for SMS notification. The Remote control function is offered
to provide end-user the possibility to manage some phone functions remotely from another phone able to
send SMS out. Using this function, end user can, when he has not the phone with him, forward calls,
power the phone off or activate the answering machine.
By activating this option, the phone password will be requested (1122). Please refer to the paragraph
―Security settings‖ in the chapter ―Settings‖ for the instructions on how to modify this password.
Select ―Activation‖ and choose ―On‖ to enable the function.
 Trusted Numbers: insert up to 5 phone numbers and edit and rename them as you wish with Options.
After completing configuration, the phone will accept the following remote commands from one of the trusted
numbers.
1) Call forwarding
If the user wants to forward all the incoming calls to another number, he can send to the NGM phone (with its
remote control enabled) an SMS containing the following text:
*#CALLFWD*#destination number, where ―destination number‖ is the number where the user wants to
receive the forwarded calls.
Example:
- if the phone number with the NGM remote control enabled is [phone];
- if the phone number to remotely control the phone is [phone] (trusted number);
- if the phone number where you want to forward the calls is [phone].
The operations sequence shall be:
a) [phone] send one SMS to [phone] with the content: *#CALLFWD*#2222222222.
b) [phone] receive one SMS from [phone] and automatically set the forwarding to
[phone].
c) all the incoming calls to [phone] shall be forwarded to [phone].
Note: the SMS content is “case insensitive”, so it may be indifferently written with capital letters, lower-case
letters or a combination of the two.