Operation Manual

Class User Manual
15
How to Dial a Call
How to Make a Call
With the number keypad, you can enter phone numbers (if wrong characters are input, press the Back key to
delete them). Press the Dial keys to dial the phone number. In SIM1 and SIM2 On state, you can choose to
dial a call via SIM1 or SIM2 (Send1 and Send2 keys, respectively). To end a call, press the End key; or to
cancel a dial, press the Back key or the End key. After the call is connected, you can see the call timer on the
screen. If your dialled number is saved in mobile phone memory, the contact name will be displayed on screen.
Dial a call via Phonebook: enter the Phonebook menu and search the desired name/phone number, and then
press Dial keys to dial..
Redial latest dialed number: in standby state, press Dial keys (SIM1 or SIM2) to view the list of the latest
dialed 20 phone number or names. Roll to the desired phone number or name and press Dial keys to dial call.
Adjust Receiver Volume
How to Adjust the Receiver Volume
When speaking to someone, press the Navigation keys Up (+ volume) or Down (- volume) to adjust the receiver
volume.
Answer a Call
How to Answer a Call
When there is an incoming call, you will be alerted with ring, vibration, vibration and ring, or vibration then ring,
according to the settings of the mobile phone.
To receive a call, press Dial/Send Keys or OK key. If you prefer to use whatever key to answer, you can select:
SETTINGS > User Profiles > [ Selected Profile] > Options > Customize > Answer mode > Any key.
To refuse a call, press the End key directly.
If the CLI (Call Line Identity) is opened, the phone number of the caller will be shown on the screen. If this
number has been saved in the phonebook, the name corresponding to this number will be displayed on the screen.
DTMF tones
Sending DTMF tones
With this option enabled, when calling up a voice mailbox or another automated phone system press the desired
number key and the ―* ―and ―#‖ keys to send DTMF (Dual Tone Multi-Frequency) tones, in order to access options
or extension numbers.
Dial Hold
Place a Call on Hold
If you have applied for dial hold, in the call conversation process, choose ―Call Center > Call Settings > SIM (1
or 2) Call Settings > Call Waiting‖ to have the following function menus:
Activate: to activate the function allowing to place a call on hold.
Deactivate: to deactivate the same function.
Query status: to query the current call status.
Note: some menu's elements need the network support; others may occur under special conditions. Please contact
the network operator for further details.