User manual

MITO User Manual
67
as following:
 Tone Setup: Include Incoming Call, power-on,
power-off, Message Tone and Keypad Tone.
 Volume: Set the volume of Ringtone and
Keypad Tone.
 Alert type: You can choose the current ring
mode from any one of the following: Ring
only, Vibration only, Vibration and Ring，
Vibration then Ring.
 Ring Type: You can choose the current ring
type from any one of the following: Single,
Repeat and Ascending.
 Extra Tone: You can have on/off settings on
Warning Tone, Error Tone, Camp On Tone
and Call Connect Tone, so as to have
corresponding tone tips.
 Answer Mode: You can choose whether to
use any key to answer.
After individualized settings, choose “Activate” in
“Select” to start profiles.
Note: After the headset is inserted into the
mobile phone, the mobile phone will
automatically change into headset profile. Unplug
the headset to return to the previous profile.
In standby state, you can press the silence key to