User manual

MITO User Manual
48
consult the service provider.
When the SMS capacity is full, there will be an
SMS icon flickering on the standby interface. The full
capacity can affect SMS reception. Delete some SMS
to solve the problem.
If the other party has received SMS, you will
hear the alert sound from the mobile phone (if such
alert function is set as ON)
Note: When sending SMS via the SMS network, the
mobile phone may display “Message sent”. It
indicates that the SMS has been sent to the SMS
center inbox set in the mobile phone but does not
mean the receiver has received the SMS. For more
information, please consult the service provider.
Write Message
You can write message in this menu.
To write SMS, press “Aa” key to switch input
modes, “sym” key to select Symbol; press “Del key”
to clear one character before the cursor, long press
“Del key” to delete all characters; press the end key
to back to the standby interface, press the up and
down direction key to choose characters, press
“select” key to confirm.
The mobile phone can send the chain SMS
more than 160 characters (limit for common text
messages). If the SMS contains more than 160
characters, then the SMS will be split into 2pcs or